I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
Hi Nordic. I am using nrf mesh sdk v4.10 and an nrf52840.
I would like to report a potential bug regarding the Light LC server.
According to the mesh specification regarding...
Hello,
I have a strange Problem. I have a Central Application where the Central will get a TagID via Uart and if there is a adv. from this Tag the Central will connect to...
Hi Team,
We are using MBN52832 Murata module in our ongoing project.We need technical support from the team.
We need hardware integration (connection) support from the...
Every once in a while I am experiencing the soft device error NRF_FAULT_ID_SD_ASSERT.
In this post I saw that you may be able to provide some information on what is going...
Hello everyone,
I work with a custom board with the nRF52840 chip on it. We have pressure, humidity and temperature sensor and accelerometer sensor on the board. We need...
Hi,
We have a product that have a BLE capability (not by Nordic) and already have a mobile app that works with it.
I am developing now the FW for the upgraded version...
Hi devzone-team,
my application (custom board with nrf52840, sdk 16.0.098 ) uses 12 timers and it's organize in the 3 parts: uart, a pwm-bus ( proprietary) and ble-scan...
hi,
my application use boot and soft device.
Is possible with the application erase only the customer register in UICR ? (of course switch off the soft device)
This...
My company is using nrf52832 and our certification agent (we will apply for CE Red and FCC for our device) is wondering if the chip manufacturer is a SIG member, otherwise...
Hello I am new on KEİL and NRF52832,
I am trying to merge this custom service and Ble_app_gls example . I added custom services libraries to ble_app_gls example ,I added...
Hi,
I want to set a custom value to my Gatt characteristic value. I can do this by writing to the characteristic in my app or the NRF_connect application.
What I want...
Hi,
I am using sdk15.3 for a project, the uart works fine when programmed without bootloader, but just after add bootloader, the uart is not worked now, also the rtt log...
