I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Running through the Toolchain setup instructions, installing VS Code to a custom location rather than the default location of C:\Users\{Username}\AppData\Local\Programs\Microsoft...
Hello everyone,
I am experiencing issues to get temperature from DS18B20 sensor with a nRF5340 board.
The probleme I have is that the only values my code reads is...
Using the HTTPS sample, the following do or don't work:
1) out-of-the box (google.com) works. 2) change CA certificate to the root for www.apple.com and connecting to...
Hi,
While developing my application for my company on a nRF9160 on a custom board, I came to use the nrfx_reset_reason.h to get my reset cause.
RESETREAS looks as follows...
Hello everyone,
I am working with the nrf52 DK.
I want to know if is possible to have the 5V pin when powering the DK with the Coin cell battery?
If not, how can I power...
Hello. After switching to NCS v2.0.0, we started observing a strange I2C issue - some sensors did not communicate whatsoever, and some sensors worked just fine. Further analyzing...
I have written my own python script that will be used to program devices with some additional data placed in UICR registers like public MAC address, passkey and serial number...
Hello All,
We have a new nRF9160 design - and I've updated the 9160 binaries to version 1.3.2 - on a few PCBA's - we're seeing an error like this:
Initializing COAP connection...
I followed your step by step guide available on your site for installing the SDK and Toolchain. My system are Fedora 36 with VS Code IDE, but the system detects the errors...
Is there any way to clear the app_scheduler queue? When BLE notifications are enabled, certain tasks are put into the scheduler. When BLE notifications are disabled, I would...
Hi
I am using nrs5340 chip as an SOC in my project. I want to use some Port1 Pins in my hardware design. As far as I studied in your Dev Zone, this
is inactive by default...
Hello,
I would like to measure battery voltage that is connected to the VDDH pin of an nrf5340 custom board. I understand that this is possible using the nrfx saadc driver...
Hi,
I am working with NRF52840 where I use the FDS library from the nRF5 SDK, currently SDK v15.3.0.
My issue is that I have seen my hardware suddently halts/hangs due...
Hi Team,
We are using the nrf52840 SOC for our application.Is there any way to reset the BLE stack when it is in hanging state and not able to advertisement or scanning...
Dear Support team,
in 2 different projects I am using the nRF52840-CKAA -D and nRF52840-CKAA -F .
I would like to read out the chip version by command and am trying to...
