Hi,
I'm using nRF52810 on SDKv14.2 and I have changed the bootloader from 52832 to work for 52810. I could do OTA now. I found that the bootloader there is no timeout when...
Is there a way around the issue where bluetooth communication acting as a pass-though terminates the packet whenever null character is found in the packet.
SDK: nRF5_SDK_12...
Hi,
When creating and adding an characteristic to service, what the meaning and difference between these two variables:
attr_char_value.init_len
attr_char_value.max_len...
Hi all,
I have compiled the ble_app_hids_keyboard example for a nRF52832 on a Laird DVK-BL652 breakout board.
I have a tablet running android 5.1.1 and the nordic nRFConnect...
Hello All,
We are using nrf52840 board interface with wiznet550i.
We try to implement mqtt tls 1.2.we get following errors..
I get certificate verification error -0x2700...
Hi,
i am using SDK v8 with softdevice v8,using master control panel pc application,added custom service and characteristics to application,problem is characteristics value...
Hi all,
I'm working on a custom Bootloader for my nrf52840-based board, and it needs to support DFU from external SPI Flash. I previously was successful with a "first draft...
We want to start with ble_app_uart example for our product but it the firmware halts at CRITICAL_REGION_EXIT() in nrf_sdh_enable_request.
We are using the example from 17...
Hiii, is there any libraries or example to read nfc tag through clrc663 nfc reader, could any one direct me to the any solution
thanx in advance
suprith
I am having problems setting up UART communication between nrf9160 and nrf52840 on Thingy91. My set up consist of a Thingy52 and a Thingy91. I am using ncs version 2.0.1....
Hi,
I've been working on Open Thread recently. I found that after I send provisioning request, even though there are 3 servers "enabled provisioning", the callback function...
Hi,
I am trying to setup a raspberry pi 0-W for flashing nrf devices. But nrfjprog doesn't seems to work.
I am using Raspberry Pi OS (32-bit).
I have fetched Segger...
Hello everyone,
I've got a simple question here today. I'm making use of the nRFCloud on our nRF9160-based system.
When using the different APIs to nRFCloud, be it location...
Hello team,
I am having a problem running LWm2m sample out of the box on Thingy91 (SDK 2.1.0, programmer 3.0.4). If I enable any of the sensors using something like the...
hi Team,
i am using Microsoft Windows 10 Enterprise OS and segger 5.40.
i am using nrf52840 DK device in my project.
i downloaded nrf connect for desktop software and...
Hiii team,
I am using the nrf52840 DK I want to connect the slave to the master How to connect a slave with out using a dedicated spi or i2c by using the simple GPIO pins...
American Semi produced this Silicon on Polymer IC a little while ago
Interested if anyone knows of this being used in a small form factor module
Seems as if they must...
Hi, We are starting to work on a production tester which will need to program a DUT based on the nRF5340. Both cores will need to be programmed and an external QSPIFLASH memory...
I've put the recommended circuit for the nRF52810 QCAA chip together on breadboard (schematic is below) and am using a J-Link Edu Mini to program.
I created a custom board...
When using Segger Embedded Studio, multiple build targets can be defined. Each build definition can have its own "defines", libraries, etc.
When using Visual Studio Code...
