I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi,
I have three Pins which are used as Port event interrupt source.(low-accuracy)
In some cases If I generate some interrupts (maybe 2 every second but random on at least...
Hi Nordic,
I want to know about the boot procedure of nrf52832-dk.
Where in the official documentation can I find what the boot order/proedure is for the nRF52832?
...
hi,
I use sdk17. 1 , protocol stack version 7.2.I have some questions. I want to get the mobile phone confirmation event in nrf52833
after the mobile phone confirms the...
Hi,
I used to be able to configure a console (SHELL) to run over a UART over USB connection (USB CDC ACM device) on Zephyr 2.5.0. With the latest version of nRF Connect...
Hi,
We developing a fitness machine about cycle bike sensor. We create a FTM service include a control point characteristic and We use some VR app(Zwift/Rouvy) to test it...
I've been stuck for days trying to get I2C working on a NRF51822 board by Holyiot. Through scanning, or using the sample project (samples/sensor/lps22hb) I am unable to detect...
Hello,
I have a project where I need to develop an application for GATT Client. The GATT client will need to:
read the value of a characteristic of a GATT server ...
It would be nice if there was a North American mirror for the Nordic Infocenter documentation pages. Given how many connections back-and-forth something from https://infocenter...
I want to use a sensor with nrf52 dev kit. for the same purpose I am first scanning sensor using twi_scanner example but it does not detect. configuration used for nrf_drv_twi_config_t...
I've been experimenting with dynamically changing advertising data, but whenever I call bt_le_adv_update_data I'm consistently running into the following error.
[00:00:04...
Hello i am new to Nordic. I found intresting examples like central_uart and peripherial_uart in nRF Connect SDK 1.7.0. These examples work well, but i need multilink central...
I thought it might be of interest to note that in the Keil compiler (which for me is code size limited because I do not have $$$ or Euros at my disposal) generates a code...
As said in the title. I can see on this page , under "nRF9160 SiP modem firmware"
that: "It can be used for nRF9160 SiP Revision 1, but only for testing and development...
Using nRF52832 and nRF52840
nRF5 SKD 17.1.0
I have bonding running, and have bonded initially (first run with bonding enabled), and Buttonless DFU upgraded once (using...
I've search DevZone, read the header info in ble_advdata.h, but don't understand when using ble_advdata_encode() is required. (I looked for Hung Bui's blog about advertising...
