Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I'm trying to interface this cheap OLED display from ebay
and while running and debugging the code I think should work(all based off the TWI_sensor sdk example...
Hello All,
I am working on Raytac module based on nrf51822 with ble_app_uart code. I can see on module there is no external crystal ,
my module is not able advertise,...
dear nordic employee
I have two thingy，one of witch is the sound server（nordic provide）
now ，I want to do a sound client，I have learned the service knowledge
but...
Hi there,
I'm currently porting the nRFgo gzll_host_w_dyn_pairing_example however my microcontroller does not have an aes encryption peripheral.
It seemed easy to just...
Hello Dev Zone,
We've been using the IoT SDK 0.9 all year and recently ported to the production release bundled with the SDK 14.1 package.
We have the DFU working with...
Hi,
I am using SDK14.1 with nrf52832 and want to write to eeprom memory over SPI from BLE characteristic call.
My spi module works and everything was working fine until...
Hi,
I'm using a nrf52 custom board based out of the telit bluemod s42. I'm trying to port the ble_app_uart example of the SDK14 onto the custom board.
The code seems to...
hi team,
i am using nrf52840. some examples in sdk14.1. the program is compiling but i cant flash it to the device. i had compiled usbd_audio and temperature example. i got...
Hi,
I'm using SDK 13.1 and SD 4.0.5 and I add to my code the WDT example of the SDK, but the code doesn't work, and when I debug, the code is stucked in HardFault_Handler...
Can NRF52 gpiote detects pulse width nearly 250ns? We use a AFE sensor that notifies MCU it's data by sending a low to high pulse. The pulse width is about 250ns which is...
Hi all,
I'm trying to measure the transmit power of nRF51 development kit with a spectrum analyzer and I am facing the following issue:
It is specified in the user guide...
hi,
i am using nrf52840. i have downloaded code for mpu-6050 in github but it is available for nrf52832. so i made all the changes in the code to work in nrf52840. but atlast...
Now I want to access the RAM of nrf52832 with pdm digital microphone, I need to put the RAM data to the RF data buffer,is there any good way to slove the problem?
Accroding...
Hi,
I'm retreiving data from my Running Speed and Cadence BLE device to my Android smartphone. The BLE device is the Polar Stride .
The problem I have is that the data...
Hi,
So I just started programming with the SES IDE and I'd like to import some libraries from the SDK and external sources to the blinky example(for example didn't even...
