Hi,
I am using ADC without external reference and no analog input in order to measure the battery level with a timer (code at the end).
I am also reading several ports...
Hi,
I'm programming the nRF51822 and save some user data into the FLASH by using pstorage_update . It works fine if I set system off mode, and wake it up. I can read back...
Hi,
I have been using nRF51822 with my Android app using Android's Bluetooth Low-Energy APIs.
In order to get more details, I am currently working on integrating the Android...
I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
Hi:
nRF52832 SDK17.1.0\examples\peripheral\spi\pca10040 , Is the maximum frequency of the SPI in here only 8M?
The following screenshots:
Can't the frequency be set...
I cannot add new devices on the nRF Cloud anymore.
After (intensive) trials with the cloud the Account screen changed and the relevant input fields are missing.
Therefore...
Hi all,
I occurred a weird phenomenon while debugging custom nRF52832 board.
Basic idea is to enable ADC(including nRF52832 ADC module and a LDO powering Analog front...
In nRF Connect 3.7.0 I'm trying to configure the NRF Matter cli as described:
github.com/.../nrfconnect_examples_cli.md
In SES I changed CONFIG_CHIP_LIB_SHELL=y:
After...
Hi,
Our product has the nRF52840 with onboard BLE antenna.
As the BLE link is on and operated i.e. communicates with TWN pad the wireless Microsoft keyboard and mouse...
Hi, nrf5832 nRF5_SDK_17.0.2 Application: we need only advertising every 10seconds, but not power optimized. The main goal is consume as low power as possible. We followed...
Hi,
I would like to know why FDS_CRC_CHECK_ON_WRITE and FDS_CRC_CHECK_ON_READ are 0 by default in the sample code. I think it's better to set it to 1 by default for write...
Hi,
I have a question about the nRF5340 pdk device and the supporting documentation.I want to know the maximum current of nrf5340pdk's GPIO, but it is not stated in the...
Hi,
what is the reason that the TX power of +8dBm of nrf52840 was reduced to +3dBm for nrf5340?
Does this mean that the transmission distance is almost reduced to half...
I have a custom nRF52833 board that acts as an HID device, which works perfectly. I now need to get values from the USB to the serial monitor for easy debugging purposes....
i found that 52832 will always restart while power supply voltage between 0.6V - 1.0V。if lower than 0.6V or higher than 1.0V. it won‘t happen。my pseudo code is follow：
power...
Hello everyone,
I'm using the NCS/Zephyr settings subsystem to store some application data in non-volatile memory.
The settings structure looks something like this:
...
I'm working on ncs 1.6.1 and nrf9160-DK.
I need to use SPI1, so i confirmed that UART1 is already disabled by default in ncs\v1.6.1\zephyr\boards\arm\nrf9160dk_nrf9160\nrf9160dk_nrf9160ns...
