Hi,
I was looking at the .map for my project and I noticed that pstorage.c was taking up a bunch of RAM (~600 bytes), which I thought was a lot, so I went into pstrorage_platform...
The document nRF51422_Evaluation_Kit_User_Guide_v2.0.pdf says:
Locate the Heart Rate demo project found in the folder
ARM\Device\Nordic\nrf51422\Board\pca10003\s310\ble_app_hrs...
Using the nRF Beacons app, but cannot see the battery condition of each beacon. Is this already implemented - if so how to turn on? If not how is it implemented?
Using the nRF Beacons app, but cannot see the battery condition of each beacon. Is this already implemented - if so how to turn on? If not how is it implemented?
Hi All
I am doing a BLE based project using nRF51822.Where i need to handle the message [with UUID] by using ble_gatts_char_handles_t.
so, can any one please share information...
I have a central application and peripheral application that are based on the multilink-central/multilink-peripheral examples.
I've modified them to run on the PCA10001...
Hi All,
I'm using nRF24L01P for TX device and want to receive packet from nRF51822 RX device.
nRF24L01P TX device Register settings are as follows;
Reg.EN_AA=0x00...
Hi,
Is there a known issue with the startup of the LF clock on the nrf5340 app core? I have scanned the nrf5340 errata but do not see anything of note.
I have this code...
There seems to be a bug in the nRF Connect SDK when attempting to use external flash for the secondary MCUboot partition on nRF9160.
Please see the minimal project for nRF9160DK...
Hi there,
several months ago I developed a usb to uart bridge based on the nRF52820. We've produced a hand full of those bridges for internal tests and the feedback showed...
uart:~$ *** Booting Zephyr OS build v3.1.99-ncs1 ***
Just build standard example for openthread , like coap_sever.
Application rebooted after openthread are fully started...
I have TCP client socket and a thread blocking on `recv()`. I noticed that while gnss is active (trying to get a fix without any assistance), no data is received until I call...
Hello,
after some hours extensive search, I want to share my findings.
I got very strange reset behaviours in a C++ project on an nRF5340 with nRF Connect SDK 2.1.0. ...
hi team,
we are triying to enable and disable timer register for our programe.how can we do this register level bit masking in nrf52840DK board without library API. kindly...
Hi there,
I am able to build asset tracker v2 from source using todays main branch from github. But when I flash the app_signed.hex through nRF Connect for Desktop v3.12...
Hi,
The fstorage library is not available for NCS. Instead, the OS Service "Settings" should be used. (see the last answer of this thread )
In fstorage, it is possible...
I am working on a prototype using the nRF Connect SDK v2.1.0 on the nRF52 Thingy platform.
For my prototype, I need to store normal log output on the internal flash of the...
Hi,
We have to enable the radio shorts in our developing multi link firmware. ( We let any node connect to 3 other nodes at the max ( 1 as a slave and 2 as a master )) ...
Hi all,
I use GPIOTE and DPPI to read SPI data from IMU sensor. After IMU send out "Data Ready" signal, GPIOTE will be triggered and DPPI start to read using SPIM2.
And...
Hello ,
I am working on a project an nRF52840 + quectel BG96 modem. I am porting the freeRTOS cellular interface library for the Nordic platform and mainly the FreeRTOS...
