Hello,
First of all, I'm delighted to have found the beginning of eMMC support for Nordic devices as software peripherals in NCS 3.2.0: https://docs.nordicsemi.com/bundle...
Greetings,
I'm considering nRF52840 for a product. My connectivity requirements are BLE 5+ (For GATT-based communication, No requirement for channel sounding, etc), USB...
Hello Nordic team,
We are evaluating nRF54L10 for a battery-powered Bluetooth LE medical device .
We are considering the nRF Connect SDK Bare Metal option instead of Zephyr...
Hi everyone,
We recently started to add the iBeacon broadcasting to our own BLE project that runs on an nRF5340. It is based on the code from the sample of the SDK (we currently...
Enabling coded broadcast compilation may result in undefined coded parameters, and coded scanning may also generate errors. May I know which SDK version will support these...
Hi, I am unable to read GPIOs (always getting 0x00000000 from gpio_port_get or 0 from gpio_pin_get). My main project is https://github.com/marcuswu/leaf-fall/tree/main/firmware...
The DECT Nr+ shell (the MAC version, not the -phy; tested with v3.3.0-ba167d9f3db4) offers IPv6 connectivity.
The DECT standard has a profile for IPv6 described in ETSI...
Hi,
I'm developing an application using the timeslot API for a custom radio protocol. The application also uses a number of the nRF52832 peripherals, as well as the app_scheduler...
Hello,
I'm having an issue with scripting AT comands directly into the code of the nRF9160. I'm a novice at all this so I apologise if the mistake is an obvious one.
Inside...
I get "ERROR: There is no debugger connected to the PC with the given serial number." when I run e.g. nrfjprog --eraseall on command line.
Programming/debugging using VisualGDB...
Hi,
The User Guide v1.3 in Chapter 2 (minimum requirements) states "SEGGER J-Link Software" under "Software requirements". Is there J-Link software specifically for use...
I've been developing firmware for the nrf52840 for a few months using armgcc+openocd+arm-none-eabi-gcc working successfully. I recently upgraded my ubuntu version (18.04)...
Hi,
I am trying to connect to cloud MQTT (cute cat) which needs username and password for authentication. In the sample the password and username is set to NULL in client_init...
I'd like to create pc program connect to nrf51 device.
In Many document as I found, describe with dongle/DK and using a virtual com port like this.
PC -> dongle/DK include...
Hi,
I have some questions about application operation while in PSM / eDRX mode.
1. when modem is in deep sleep mode, is the application halted too ?
2. if not, what...
Hi, I am using nRF52 as a central SDK15.2 and SD132. I want to add in peripheral mac address which I want to put in the whitelist manually from the UART. But the example that...
Hi,
I read on the forum that DMA for UART block is not possible on nRF51. Is it true?
If yes, is there any way that we can enable this? Our application demands DMA for...
We developed device based on nrf52840 and android app based on nrf uart v2.0. The application runs very slow in google pixel 2xl., oneplus3 etc thich are updated to latest...
I'm working on certification for a product which uses an nRF52832 chip. I've found https://launchstudio.bluetooth.com/ListingDetails/14830 , which it seems I can use for the...
Hello,
I followed getting started guide given in the link below,
https://devzone.nordicsemi.com/tutorials/b/getting-started/posts/getting-started-with-nrf9160-dk
I started...
(there isn't an option for nRF Android or Mobile when creating a case!)
Next to each Characteristic is one or more little arrow icons:
Where is the documentation which...
