SDK_9.0.0
I was trying to implement 2 different UART connection parameters so I decide to use re-initialization.
My initial parameters included APP_UART_FLOW_CONTROL_LOW_POWER...
I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
Hi,
i have PCA10059 dongle board. when i want run my program on it, fds_init return FDS_ERR_NO_PAGES. and also in nrf connect i can see range of different application...
Due to the rewrite of the DSM persistent storage layer the DSM_VIRTUAL_ADDR_MAX define can no longer be set to 0. This has changed since 3.2.0 where it could be 0.
During...
I ask you for help with programming Bluetooth module u-blox ANNA-B112. It is based on nRF52832. I have already installed Keil MDK5 with nRF52832_xxAB package, soldered the...
I'm trying to use sine function such as: S = sin(0.8)
But variable S come to zero after this code. Go to Debug mode and add a break point to view the change of variable...
Hi,
can we do the mathematical operations (like math.sqrt ) using nRF51822 ? Since, our project requires many simple mathematical operations, we need to decide whether...
Hi,
During the initialization of the SIM I have this message:
There was an error submitting your user information. This SIM cannot be activated. I am from Israel. What...
Hi All,
I have the strange issue with scanning. I have the project losely based on examples where I created peripheral adevrtising with 1s interval. This sends the custom...
Hi there, I'm using nrfutil ( nrfutil version 6.0.1 ) to dfu via ble (dongle),
Mac (10.15.2), windows (10), linux (raspbian) have been tried out to update the firmware none...
I am using the '840 to construct a small network using the ESB stack. In this design, a master (dongle) transmits to each slave and receives an ACK w/payload response. The...
I changed the way to get the upgrade program in the bootloader program and wrote a function to write the accepted bin file to the bank0 area. However, I found that it took...
Hi,
I am using BMD300 rigado board having nrf52. In my application i am tracking the ADXL362 accelerometer's motion.For this, I am combining SPI, UART(for displaying data...
Good evening,
after a very long research I couldn't find any answer.
Is (and if, how) it possible to connect an Arduino (or ESP32) via SPI, I2C etc. with the nrf52840...
