I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Taking some measurements on a (very) bare bones update to the nRF9160 Feather and I'm getting around 13uA idle. I know the T91 is about 10uA at it's minimum but in what mode...
Hello there!
We are using nRF51822 SoC with nRF5 SDK v12.3.0.
Our nRF51822 SoC that acts as a BLE peripheral pairs and bonds with the smartphone running Android or iOS...
Hello fellow users, I've have stumbled upon an issue within my alteration of the ble_app_blinky example project.
I am using the PAN1781 nrf52820 evaluation board, which...
I am evaluating the usage of Azure C embedded SDK ( https://azure.github.io/azure-sdk-for-c/ ) in one of the nRF 9160DK development samples (https_client)
The Azure C SDK...
Hi,
I want to print the log through UART from the Custom board. In Custom Board Uart pins as configured with (RX: P1.00 and TX: P1.01). So, I want to read the log by using...
Hello all,
got the "ble module" that has the nRF52820 on it ... therefore I am wondering how to start
Currently I found this useful: https://www.nordicsemi.com/Products...
Hello,
I've been struggling to follow along with this tutorial:
Is this the most up to date instructions for how to update the device over bluetooth?
I'm using SEGGER...
I want to perform test modes on my rf module and want to connect it to the computer for that. Im planning on using the NRF connect for desktop for that but I am missing the...
Hello,
In my project, I am trying to connect and communicate with several BLE devices at the same time. Thanks to the nRF Toolbox application, I have seen how to connect...
Is there any way to determine binary size from hex file? We are using NRF-PROGRAMMER to flash firmware to device. Below is the screenshot of current firmware in said program...
Hi,
Is it safe to use NVS and Settings on the same partition at the same time (the same application, BLE is running, NVS can be called concurrently to eg. pairing process...
Hello, I am currently using nRF52840 + NCS 1.5.1 (including zephyr 2.4) I am using BG95/96 model meaning offloaded socket to have internet connection for leshain & lwm2m The...
Hello,
I'm working with nRF52833/nRF82540 for quite a long and now we're starting to enter in production.
For this, we would like to flash applications using FTDI to a...
Hello Sirs,
I loop typing the same command program:
clear>tart_channel 02>output_power pos0dBm>start_tx_modulated_carrier>cancel
After repeating the same instruction...
Hi,
Project development using board with HL7800 modem similar to Pinnacle 100 did not succeed with FOTA upgrade so it is been decided first to try it with nrf9160dk_nrf9160...
