I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
I'm developing a custom board with a uBlox NORA-B121 module, which contains an nRF5340. The board has a Microchip MCP2515 CAN controller, and for some reason, I can't receive...
I am porting an application from NCS v2.3.0 -> NCS v2.4.0. My application runs in nrf5340dk_nrf5340_cpuapp_ns with NSIB and mcuboot. The mcuboot uses external flash for the...
I have Thingy:91 dev board. I have flashed hci_lpuart sample to nrf52840 and successfully ran lte_ble_gateway sample. Now in my application I want to connect to the same hard...
Hello,
I'm trying to reduce the power conception of my custom board with a nrf52840 and a 4g modem on uart.
For this test, I reduce the code to a loop (modem is off...
NRF52840 running 17.1 SDK and using QSPI interface to erase a block of memory from AT25FF321A external flash IC.
When we call erase it takes 930 millisec to finish erasing...
I was able to turn ON the Nordic’s BLE DFU over SMP + BLE NUS using Matter Lock sample code successfully.
The “DFU over SMP” is really great but further customization is...
Our app uses the nRF5340. We use CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL so that we can change the tx power for advertisements and connections. When using ncs 2.6.0 it seems...
Hello,
I am creating this Post to summarize all my findings regarding a problem with the SLM Application that multiple people are experiencing, in order to make it easier...
Hello,
We are trying to use the nrf5340 as a wireless HID mouse over BLE. Our cursor moves just fine on Windows 10, Windows 11, a Mac, and two Android tablets (Lenovo, Amazon...
Hello,
I'm using Zephyr 2.6.1 and nRF5340.
Tried to include in my project the NRFX driver for USB and I'm currently not able to find an enabling option for that.
In...
Hello everyone,
I am doing some testing regaring advertising TX power on peripheral side with BLE.
I am using NCS version 2.6.1.
Hardware: nRF52840 Dev Kit
My...
I am trying to update our app from SDK 2.5.0 to 2.7.0 and it seems AWS MQTT has changed. We are building for the Thingy 91. The following lines are unrecognized.
CONFIG_AWS_IOT_CLIENT_ID_APP...
Hi ,
I need A small Assist from you , that i mentioned below .
Category: Bluetooth Mesh Network / Connectivity Issues.
Description:
I am encountering an issue with...
Hi everybody,
I need to send some user application configuration parameters to the nrf9160 on an nrf9160DK via the nrf52840 on the nrf9160DK. The client android application...
hello everyone,
I have a task to establish the connection between the BLE peripheral and mobile application after verifying the encryption by exchanging the public key of...
