I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
We are having issues with data not being relayed across the mesh network.
BACKGROUND Here is some background information on the project.
The device is an industrial IoT...
I have combined the two example codes one is buttonless dfu bootloader and another one is ble uart
after combined there is no error while building the code. but advertising...
Hello. For a long time I see that nrf9160 Serial LTE modem examples are not stable, tested few times in a year.At very begininng I have customized for my own needs SLM application...
Hello Community,
I downloaded SUPL library of version 0.7.0, my ncs version is v1.5.1.
I have changed following in prj.conf
I am using NB-IoT network of vodafone so...
Hi, We are planning to use nrf52833 forone of the project and BLE mesh ned tobe implemented.We have downloaded nRF5 SDK v17.0.2 and nRF5 SDK for Mesh v5.0.0. KIndly let meknow...
I'm implementing the SGTL5000 driver found on the github Nordic playground with the NRF52832. My custom board connects the NRF chip to SGTL5000. I've changed the drv_sgtl5000...
Hi. I'm trying to build the hello world sample using the NCS following this guide , but I get this error:
Building ‘modules/secure_module/spm_subimage-prefix/src/spm_subimage...
Hello Everyone,
i'am trying to build my Hello_world application but i'm having some issues and i can't figure it out there's some ninja file whch stopping the build does...
I'm using NRF52840DK, sdk for mesh version 5.0.0, sdk nrf5 version 17.0.2. When i add FreeRTOS into LP example, i have some problem:
I think it problem with timer mesh and...
Dear Members,
Can I merge the code from this example :
E:\nRF5_SDK_17.0.2_d674dde\examples\ant\ant_plus\ant_bpwr\bpwr_rx\main.c , it's using S212
with,
E:\nRF5_SDK_17...
Hi, I'm using the nRF Mesh Library for Android and I'm looking at the data of a mesh network in JSON format. I don't see anywhere the sequence number of a provisioner. Where...
I am following the guide on this page: https://github.com/project-chip/connectedhomeip/tree/master/examples/lock-app/nrfconnect
I can build the firmware, but having trouble...
1， The SDK is nRF5_SDK_14.2.0_17b948a;
2, running the usbd_audio project; It don't control the volume by 52840;
3, Can you help me how to adding the volume control in...
We tried two build options:
1. thread version 1.1 with
# Set OpenThread NCP architecture CONFIG_OPENTHREAD_COPROCESSOR=y CONFIG_OPENTHREAD_COPROCESSOR_RCP=y
CONFIG_OPENTHREAD_THREAD_VERSION_1_1...
Hello
I'm using sdk v17.0.2 and I'm going to program using nrf52840 dongle.
I used nrf52DK because I didn't have nrf52840DK. And I'm going to upload the source code that...
