I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hello!
I am trying out the SMP Server sample. I have it all built and flashed on my nRF52DK and have tried the echo command using the nRF Device Manager on iOS which worked...
Dear all,
I am facing similar issue. found in this thread:
devzone.nordicsemi.com/.../364579
I used openOCD running on Raspberry Pi to debug nrf52480 dongle with Eclipse...
Hello Group,
I got an error when I tried to “Open nRF Connect SDK Project” from the Segger Embedded Studio.
Do have any idea how to fix it? (the attached here my process...
Background:
Custom boards
SDK 15.2.0
SoftDevice: s140_nrf52_6.1.0
Hello,
We recently updated our project to use 2M PHY instead of the default 1M PHY. Our device...
Hello!
When looking at the central example ble_app_multilink_central in sdk_config.h, I found out that all links are considered central, with NRF_SDH_BLE_PERIPHERAL_LINK_COUNT...
Since the beacon will run on CR2032, I'm trying to minimize power concumption.
NOTE: All measured using nRF52-DK + PPK2 configuration
The online profiler says that if...
Hi all,
I have evaluated the performance with ble mesh on nrf52840 board on zephyr system.
when I use ble sniffer(wireshark) to catch the package I fond that every message...
Hello sir ,
I have successfully uploaded hello_word code from sample and i got" Hello_word" printed on lte monitor 's display using nrf9160.
now am trying same thing with...
Hi,
I would like to use the Event Manager for a product that is currently planned to use a Nordic product; however, I would like to be able to port the firmware (or parts...
Hi,
I am using ncs 1.5.2, and want to create a FOTA image. I am successfully able to build, flash and confirm the image, but am unable to set the version number of the image...
This is the errors , please help, to successfully create .hex file
If you want to look after full log details .......
Building firmware west build --build-dir c:\Users...
I bought a thingy91 module with ibasis scheduler on board. When I made the first installation of the mfw_nrf9160_1.3.1.zip software and the thingy91_asset_tracker_v2_ltem_2022...
I'm building a simple application using I2C to read sensor data (BNO055). I confirmed I2C and my sensor are all configured appropriately and working smoothly, but when I added...
Hi,
I'm using the mqtt_simple example to develop a new application.
I want you to tell me what lines of code I need to add for the nRF9160 to work in the minimum power...
Hi,
I am working with NRF52840 DK, from this i am using KEIL IDE. I got some error while opening the KEIL SW like Cannot set path to software packs. Make sure that RTEPATH...
