Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hi,
I just bought a new PPK2. After installing "nRF Connect for Desktop", when I plug USB into PPK2, Windows 11 shows USB Device Not Recognized error.
I tried with different...
Hi, I'm running the sample "peripheral_uart" on an nRF52dk. It has a config called CONFIG_BT_NUS_UART_RX_WAIT_TIME, which is set to 50. The comment says the unit is milliseconds...
Hi,
I am trying to create a simple network using nrf5340 boards using BLE and Visual Studio Code as follows:
1. Scenario 1 - Very simple network: one nrf5340 communicates...
Hi,
I want to have a nrf52840 communicating with a Raspberry Pi over USB. The single USB port of Raspberry Pi 3A+ is also used by a LTE modem. So I have an USB hub IC to...
Hi,
I am currently want to re-compile my code that actually works in previous version of sdk. But now, in this current version (v.2.2.0), I got error zephyr.h not found...
Hi,
i am running the peripheral uart exsample on a thingy52. using a usb/ttl converter on my PC and conect it to P0.2 and P0.3.
then using Terminal program on pc and nrf...
Hi All,
We have a product that requires the use of the file system Fatfs, which is plugged into the external SPI FLASH. Therefore, the hardware platform used is: n52832...
Hi,
I got 3 nrf52840 demo board. I want to use nrf Programmer v3.0.4 to write softdevice S340 to flash.
When I add file, I can see my S340 hex in file memory layout. But...
I'm working on a project that uses BLE, NVS storage (for some serial number data and a few other variables) and littlefs, for storing log data that a client can then access...
When I look at my toolchain manager, it looks like nRF Connect SDK is installed:
And, I can click the "Open VS Code" button and browse to one of the examples (the uart...
A colleague of mine was playing around with the modem settings for a 9160 and now the device refuses to connect to the cellular network.
I've reflashed the device including...
Hi,
I try to use Soft Device Controller (sdc) on my application. I use VS Code, Zephyr and NRF Connect SDK v2.1.2 .
I got error during build. Could please help me on this...
Hi
I am working on Nrf5340 . So, I need to Know the procedures which I need to follow for nrf5340 and how can I do that on NRF Connect SDK.
Kindly help me to get it done...
