Running a test that sends a small ping packet to a server about 1/minute and I'm seeing intermittent board resets. I'm still trying to track down the cause, but in one case...
Hello Nordic support,
We are designing a battery-powered device using the u-blox NORA-B206-00B module, based on the nRF54L15. u-blox support recommended contacting you regarding...
Hi Nordic DevZone,
We are currently looking at how best to handle nRF9151 programming in mass production, and I would like to understand Nordic’s intended approach a bit...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hello,
I tried to update my profile to be able to open new issues, but unfortunately Lyon, France wasn't proposed. I had only a few (~20) cities from France.
Marc...
Hello I want to use example of bme680 in nrf52840 with zephyr. Example return data in format
integer part. fractional part
How can I convert it to AIQ ? How can I read...
Hi,
I have 1.8V VDD with 3 analog inputs, channels 1,2,6.
my question is can i use them with internal reference and read from ADC by sequence. for channel 6
1. I...
Hi,
I am using nrf52840 DK board, from that I am using Segger embedded studio, so I am building SAADC with ble_app_uart combined code. If I build my code, getting some error...
I wanna ask about this code. Why we use "memset" before read flash?. Must i create new token before read flash.
#define RECORD_KEY 0x2222
fds_flash_record_t flash_record;...
Hi,
How many devices can be meshed in Bluetooth? I see that both NRF52840 and NRF52833 support Bluetooth 5.3. As I know normally v5.3 supports up to 7 devices. Is it same...
Hey guys,
an issue I was postponing but need to solve for an upcoming management demonstration: I can only connect to the nRF5340DK VCOM with putty.
Using Hterm or the...
Hello Community,
i'm currently working with NRF5340dk. My application collects data from sensors for now and display it on the terminal emulator. Next step for me is to...
Setup -
1. Zephyr 2.7.0 for firmware build .bin file and signed using imgtool.
2. Working phones - iPhone, Custom Android ROM (Android 12).
3. Not working phones - Xiaomi...
I following description of https://github.com/NordicSemiconductor/pc-ble-driver#Compiling-pc-ble-driver-from-source to build pc-ble-driver
pc-ble-driver\build> cmake -G...
Hello,
I'm trying to determine the actual used data rate for the coded PHY but cannot find the corresponding API / data structure / enums.
Am I missing something? Can...
Hi!
I have the Actinius Icarus board pre-loaded with the Actinius asset tracker firmware.
Lets say I instead want to load the Nordicsemi asset tracker firmware on the...
Hello,
We have been having strange issues with the watchdog on some of our development devices. The issue is that it seems the watchdog will sometimes not properly reset...