nRF54LM20 + nRF7002, NCS 3.4.1: SoftAP provisioning and station low power in one image
Our battery-powered product (no BLE antenna), removed due to space in the PCB and...
Hi
Have you done any benchmarking to estimate the difference in power consumption when comparing the nRF9151 in NTN mode vs LTE-M?
In particular I am curious if NTN has...
Hello.
When I ran the NCS SBOM command using VS Code, the following error occurred, and the file could not be generated.
I would appreciate it if you could tell me how...
I am using nRF Connect SDK 3.4.1 on three nRF54L15 devices:
A ───────── B ───────── C
A–B: A central / CS initiator
B peripheral / CS reflector
B–C: B central / CS initiator...
Setup
- Programmer: nRF54LM20 DK (PCA10184), debug out header P13 to an external board over a 10-pin ribbon under 10 cm, SWD0_SELECT grounded on the target side. The DK...
I created software and flashed successfully to the nRF54L15-DK. It is to toggle an LED on and off on P2.09.
#include <zephyr/kernel.h>
#include <hal/nrf_gpio.h>
...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Hi, Absolute beginner here. I'm currently working with the nrf52840-dk and wanted to test read write operations into flash memory with it. The idea is to use flash_fds and...
Hello! i use a nRF52833 DK and the nrf connect sdk for developing Bluetooth LE applications. I use the Bluetooth Event Trigger extension to toggle GPIO pins with every BLE...
I'm trying to find out the wireless technology that I can use for peer to peer communication. The main requirement is to have good data transfer speed (at least 500kps or...
Hi there, I need to collect modem logs to investigate LTE-M connectivity issues in specific countries. I have been using the command AT %X MODEMTRACE=1,2 to activate them...
Hi guys,
I would like to run the sample SMP_SRV at NRF5340DK with memory mx25r64 configured as SPI (not QSPI).
What are the necessary changes?
I tried build an...
Hello,
when I plug in my nRF5340-DK, a mass storage device called "JLINK" appears on my Windows PC.
Normally, it is possible to copy .hex files with firmware to the mass...
Hello,
I need a bit of help understanding the Bluetooth qualification requirements as described here: https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/protocols...
Hi, I'm just a beginner in nrf91 series MCU and I want to communicate my nrf9160dk with existing application in SMT32 over UART.
I want to use UART1 which is default connected...
MERHABA,
resimlerde işaretlediğim PCB devresinde nRF52840'ın padlerinde işaretli alanlara vialar eklenmiş görünüyor. Ancak PCB üreticileri pedlere bu şekilde via eklemenin...
In preparation for production, I am testing NB-IoT with China Mobile Hong Kong (CMHK). The same test code runs in Canada as well as in Japan with LTE-M with no problem. The...
Hello,
I am currently using some code from the HTTP client sample to send HTTP requests to a server from my application. I have encountered an issue where the thread from...
I am designing a beacon product, but after trying it out, I find that the SDK is not that friendly to me. What resources can I refer to? The requirements for the product I...
Dear Nordic Team,
We have tested that the nrf5340DK borad was ok for the broadcast audio source role.
We want to add the nrf21540EK FEM borad on it to test the max broadcast...
Hello,
I have a question regarding sensor configuration. I am planning to use the LIS2DW12 sensor. While reviewing the SDK, I found the source code in the path sdk\zephyr...
Hi, We are developing a custom PCB which contains the nRF52840 MCU as the main MCU on the PCB. The PCB is battery powered and would need to support timekeeping even after...
