I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
Hello,
i want to use the nrfSniffer in Windows. I updated the latest firmware (4.1.0) to the nRF52840 Dongle. I installed also the extcap Package to my personal folder....
Hello,
I would like to use the nRF52840 PDK version 0.9.0 at 1.8V VDD since my peripherals operate at 1.8V. At the same time, I would like to debug the DK through USB. ...
So I am working on ner52840 with nrf connect sdk, I need to scan a device which is broadcasting ble 5.0 extend advertising for a period of time(probably 2 second), then my...
Good morning.
I have an EVAL nRF52_DK PCA10040 V2.1.0 and connecting the EVAL to the PC through the USB cable no VCP and no CDC disc are recognized.
With an EVAL nRF52_DK...
i build the zephyr samples/hello_world Demo ,and it can run and print well on BOARD_NRF52840DK_NRF52840.
but this hex file cannot boot up on my own board.
for simplest...
In my nRF52810 based circuit board I'm trying to use the RTC along with the RTC tick interrupt to toggle an IO pin every 6msec. In main.c I use WFE to enter low power mode...
Hello!
I'm developing my own board featuring the nRF5340.
I wanted to add a PCB antenna to my layout and I figured the fastest way to create a functional prototype is...
Hello,
I noted that in the reference layout for nRF52832 CIAA with DC/DC converter there are VIP (Via-In-Pad) and blind via underneath the WLCSP package. I would like to...
Hi, I am curious about overclocking of nRF52832.
The reference design of nRF52832 used 32MHz oscilators to get the 64Mhz system clock.
If change the XC oscillator from...
How can I change the regulator configuration (specially the LDO voltage output) in runtime, and also, how could I do it in compilation time?
PS: I use mcuboot as well.
Hello,
I am trying to print things from my board. I would like to go with NRF_LOG_INFO. I have the modules enabled, included the essential libraries, including the c files...
I'm using the FOTA download library to download both the nRF9160 app firmware and the cellular firmware. Since the cellular firmware is so large it's more likely to drop a...
Hi,
I have nrf52840 development board. I use the debug out port for programming my external nrf52840 chips.
Now my external chip is nrf5340 which i need to program....
